Du Jiang, an associate professor directly employed by Henan Institute of resources and materials industry technology, Zhengzhou University, is mainly engaged in the synthesis and application of nano materials. A total of 10 SCI papers were published by the first author and corresponding author, of which two papers were highly cited by ESI, and the total number of citations was 961. Among them, the paper "hierarchically ordered macro mesoporous TiO2 graphene composite films: improved mass transfer, reduced charge recommendation, and their enhanced photocatalytic activities" published on ACS Nano in 2010 was selected as the top ten papers of ACS Nano by the American Chemical Society. In addition, many published papers have been cited by chemical society reviews and chemical reviews for many times, which have been highly recognized and praised by experts at home and abroad.

Nailiang Yang received his BS degree in Material Chemistry from Sun Yat-sen University, China, in 2007. He then obtained his Doctor degree from University of Chinese Academy of Sciences in 2013 under the supervision of Professor Dan Wang. Because of his effort in photoelectric conversion with semiconductor and graphene, he received the award of CAS Excellent Doctoral Dissertations. After graduation, he joined Professor Marie-Paule Pileni’s group as a postdoctoral fellow at Université Pierre et Marie Curie, France. His research fields extended to critical synthesis and assembly of metallic nanoparticles, and also the intrinsic properties related to nanocrystallinity. Since 2015, he has been working as a Research Fellow at the School of Materials Science and Engineering in Nanyang Technological University (Singapore) in Professor Hua Zhang’s group. His research interests include synthesis and assembly of 2D nanomaterials, and also the intrinsic properties related to crystal phase. Since 2018, he started working in the Institute of Process Engineering, CAS as a full professor. Until now, he has published 35 papers and 1 book, including Nat. Chem., Chem. Rev., J. Am. Chem. Soc., Angew. Chem. Int. Ed., Adv. Mater., Chem, ACS Nano, et al. The total citation is over 3000, with an h-index of 18.

Jiangyan Wang received her BE from the China University of Mining and Technology, Beijing (2010) and PhD from the institute of Process Engineering, Chinese Academy of Sciences (2016). She is currently a postdoctoral scholar at Stanford University. Her current research interests are focused on the design and synthesis of micro- /nano-structured functional inorganic materials and nanomaterials for energy conversion and storage, such as lithium ion batteries and supercapacitors.

Bao Wang received his Ph. D. in Physical Chemistry in 2011 from the Institute of Chemistry Chinese Academy of Sciences. He worked at Nanyang Technological University as a Postdoctoral Research Fellow (2011-2013), Oregon State University as a Postdoctoral Scholar (2013-2014), and Seoul National University as a Senior Researcher (2014-2015), respectively. In 2016, he joined Institute of Process Engineering，Chinese Academy of Sciences (IPE CAS) and took a professor position. Bao Wang’s research interests are focused on fabrication of and application of nanostructured inorganic materials in the field of energy storage and conversion.

Jiawei Wan received his BS degree in physics in 2010 and his PhD in microelectronics and solid state electronics in 2015 from Wuhan University. He was a Postdoctoral Fellow at Tsinghua University. His current research interest is focused on synthesis of nanomaterials and their application in energy device.

Institute of process engineering, Chinese academy of sciences  2017-

Synthesis, modification and application of graphdiyne

Forest chemical processing engineering, school of materials science and technology, Beijing forestry university 2013-2017

PHD Candidate,co-culturing at Inorganic Functional Materials Group, Institute of Processes engineering, Chinese Academy of Sciences.

Master: Metallurgical engineering , University of Science and Technology Beijing.

Undergraduate: Metallurgical Engineering Major, North China University of Technology.

Main research directions: synthesis of transition metal oxides and regulation of photothermal conversion.In particular, morphology-controlled synthesis and crystallization process control of amorphous hollow nano materials.

Successful and Professional Continuous Students of Grade 2015

Graduated from Yantai University

The research directions: synthesis of HoMSs and their applications in batteries

2015-2019 Chemical Engineering and Technology Major, Qufu Normal University, Bachelor of Engineering.

2019- Studying for a master's degree in the Institute of Process Engineering, Chinese Academy of Sciences.

2017-, PhD candidate of the University of Auckland, New Zealand;

2019-, visiting scholar in Prof. Dan Wang’s group, the Institute of Process Engineering, Chinese Academy of Sciences;

Main research interests: synthesis and modification of multi-shelled hollow structured materials and their application on energy storage and conversion.

2012-2015, master study in Southwest Jiaotong University, majoring in Materials Science;

2008-2012, bachelor study in Southwest Jiaotong University, majoring in Materials Science and Engineering.

He was graduated from Qingdao University of Science and Technology (Master degree 2018).

Harbin Institute of Technology, School of Chemistry and Chemical Engineering -Institute of Process Engineering, Chinese Academy of Sciences. 2017-

Hollow multi-shelled structures with MOFs as template and the application in photocatalytic CO2 reduction.

The application of hollow multi-shelled structure in drug release system.

Harbin Institute of Technology, School of Chemistry and Chemical Engineering, materials chemistry, 2012-2016.

Preparation of copper ruthenium based photocatalyst.

2015-Now Institute of Process Engineering, Chinese Academy of Sciences

Preparing and applying in photocatalytic CO2 reduction of HoMSs

2011-2015 College of Chemistry and Molecular Engineering, Qingdao University of Science & Technology

Quan Jin jointed the Functional inorganic materials lab, IPE, CAS, in 2012 (From 2012 to 2019). 

Her current research interest is focused on the design and development of biological materials: drug delivery, fluorescence detection, separation and purification of bio-molecular; development of solar energy conversion materials: solar cells, catalyst for the photocatalytic reaction.  

2015.9 -2019.6，Bachelor in Qingdao University of Science and Technology

Admitted to Qingdao University of Science and Technology in 2019.

Now study in Institute of Process Engineering, Chinese Academy of Sciences, Beijing China

Supervisor: Prof. Dan Wang

EDUCATION

PhD in Chemical Engineering                                                              2014-2018

Institute of Process Engineering, Chinese Academy of Sciences, Beijing China

Supervisor: Prof. Dan Wang

PhD dissertation was mainly focused on:

Synthesis and preparation of multi-shelled metal oxides hollow microspheres

Investigate reduction of metal oxides

Sulfur loading/encapsulating technologies

Cathode preparation and cells assembly

Comprehensive material characterizations and electrochemical performance testing

Achievements:

Controlled on the morphology of metal oxides

Sulfur was successfully encapsulated into metal oxide hollow spheres

As-synthesized product showed high electrochemical performance for lithium sulfur battery

Master in Chemical Engineering and Technology                             2011-2014

Beijing University of Chemical Technology, Beijing, China

Supervisor: Prof. Chun Xi Li

Bachelor in Chemistry                                                                          2004-2009

King Saud University, Riyadh, Saudi Arabia

2015-now. University of Chinese Academy of Sciences, Institute of Process Engineering. Research topic: synthesis of TiO2 hollow spheres and its application in perovskite solar cells. Master: General Research Institute for Nonferrous Metals Bachelor: Nanjing University of Science & Technology.

Graduate student of Beijing University of Science and Technology （2015-）

Research：Research and Application of Hollow Multi-shell Structural Material in Fabric-based Flexible Energy Storage Device

Master of Institute of process Engineering, Chinese Academy of Sciences

Bachelor of Nanjing University of Information Science & Technology

Majoring in multi-shelled SnO2 hollow microspheres applied to photodetectors

University of Science & Technology Beijing-CAS Institute of Process Engineering 2015-now

Preparation of hollow multi-shell structured photocatalysts

Characterization of hollow multi-shell structured photocatalysts in solar water splitting reaction

Shandong University, School of chemistry and chemical engineering, Polymer chemistry and physics 2012-2015

Preparation and application of benzoxazine resins with high Tg, intensity and thermal stability

Shandong University, School of chemistry and chemical engineering, 2008-2012

Major in Microelectronics and Solid Electronics, Lanzhou University

Research: synthesis of multi-shell metal phosphides and their electrolytic water properties

Ph.D. from 2017 to the present

School of Metallurgical and Ecological Engineering, University of Science & Technology Beijing—Institute of Process Engineering, Chinese Academy of Science

Research field: Design and synthesize micro/nanostructured functional inorganic materials by spray drying for electrocatalysis

Received ME degree in 2017

School of Metallurgical and Ecological Engineering, University of Science & Technology Beijing—Institute of Process Engineering, Chinese Academy of Science

Research field: Synthesize hollow multi-shelled structure by electrostatic spray for CO oxidation.

Received BE degree in 2013

School of Materials Science and Engineering, Hebei University of Science & Technolog

2020 to present: Master degree, Institute of Process Engineering, Chinese Academy of Sciences

2016-2020: Bachelor degree, Qingdao University

Research interests: preparation of hollow multishelled spheres and Encapsulation of Monoatoms on the surface of HoMS

Education Background: Graduated from Metallurgical Engineering College of Anhui University of Technology in June 2018. Since September 2018, as a master, I have jointly trained in the School of Metallurgical and Ecological Engineering of University of Science and Technology Beijing - Institute of Process Engineering of Chinese Academy of Sciences.

Master's degree in metallurgy and ecological engineering, Beijing University of Science and Technology, Institute of Process Engineering, Chinese Academy of Sciences, 2018-present

Research direction: synthesis and application of hollow multi-shelled structure sulfides

College of Metallurgical Engineering, Anhui University of Technology, 2014-2018

Mei Yang is an associate professor in Institute of Process Engineering, Chinese Academy of Sciences. She received her BS degree in metallurgical physical chemistry in 2001 and her PhD degree in 2008 from University of Science and Technology Beijing. Her current research interest is focused on synthesis of HoMS materials and their application in energy storage and conversion, flexible electron devices, microwave absorption, and so on.

Jian Qi received his BS degree from the Hebei Normal University in 2005, and his PhD degree from Beijing Institute of Technology (BIT) in 2010. After this, he went to National Center for Nanoscience and Technology (NCNST) in China for his postdoctoral research. Then, he joined Prof. Dan Wang's group at the Institute for Process Engineering (IPE), Chinese Academy of Sciences (CAS). His current research interests are focused on the fabrication of hollow multi-shelled structured (HoMS) materials with well-defined structures as well as their application in catalysis. He has published 35 papers in the important SCI journals during the past years, such as Chem.Soc. Rev., Energy. Environ. Sci., Adv. Funct. Mater., Adv. Mater., and 4 papers are selected as front cover and inside cover and 4 papers are named as Highly Cited Paper of ESI.

Nan Xu is an associate professor of Institute of Process Engineering, Chinese Academy of Sciences. She received her M.S. degree from Jilin University and Ph.D. degree from Yamanashi University (Japan) in 2009 and 2015. Her current research interest is focused on the design and synthesis of hollow nano/micro-structural material and their application in photocatalysis and electro-catalysis.

Dan Mao is an associate professor in Institute of Process Engineering, Chinese Academy of Sciences. She received her BE degree in 2004 from Beijing Technology and Business University and MS degree in 2007 from Institute of Process Engineering, Chinese Academy of Sciences. Her current research interest is focused on the design and synthesis of hollow or porous inorganic material and their application in photocatalysis and photovoltaic conversion.

Yasong Zhao received her Ph.D. degree in the school of chemical engineering and chemistry from Harbin Institute of Technology in 2019. And currently she is a postdoc under the guidance of Professor Dan Wang from the Institute of Process Engineering, Chinese Academy of Sciences. Her current research interests involve design and synthesis of 2D materials for energy conversion and catalytic applications.

2016-2022.1，PhD of Institute of Process Engineering, Chinese Academy of Sciences.

Research field: The preparation of HoMS and their application in drug sustained release.

2012-2016, China University of Mining and Technology (Beijing)，Bachelor.

songxiao@ipe.ac.cn

Xiao Song is an assistant researcher in Institute of Process Engineering, Chinese Academy of Sciences.

2003-09-2007-06 Bioengineering, Bachelor of Engineering, Shandong University of Science and Technology, B. S.

2007-09-2010-06 Jilin University, Master of Biochemistry and Molecular Biology, M. S.

2011-09-2016-06 National Center for Nanoscience, Chinese Academy of Sciences, Physical Chemistry, PH. D.

In the post-doctoral period, she participated in the research and development of bacterial/viral diagnostic products based on PCR and rapid detection technology of malaria parasites.

During his Ph.D., he studied the effects of exosomes on the immune system in tumor microenvironment and the molecular mechanism of spermatogonial stem cell oxidative stress regulation. The first author published one paper and the second author published one.

He served as a chief engineer in the New Energy and New Materials Department of Beijing Science and Technology Commission for an actual term of 18 months.

During master's degree, he participated in the construction of microbial macrogenome library, and constructed five expression vectors of esterase and protease, and realized product transformation.

Mr Zumin Wang, Han nationality, was born in Danjiangkou, Shiyan, Hubei province on June 1990. From 2008 to 2018, he studied in the School of Metallurgy and Eco-engineering, University of Science and Technology Beijing. He achieved his Doctor of Engineering degree in June 2018. In September 2018, he joined the Institute of Process Engineering, Chinese Academy of Sciences, and was engaged in post-doctoral research under the guidance of Professor Wang Dan. His research interest focus on the synthesis of hollow metal organic frameworks (MOFs) & their derivatives and their applications in environment and energy.

Institute of Process Engineering, Chinese Academy of Sciences, Special Research Assistant. Obtained a Master's degree from Shanghai University in 2017 (Supervisor: Researcher Wei Yan). Awarded a Ph.D. from the University of Chinese Academy of Sciences in 2020 (Supervisor: Professor Kebin Zhou). In the same year, joined the Department of Chemistry at Tsinghua University for postdoctoral research (Supervisor: Professor Chen Chen). The main research directions include the preparation of atomic site catalysts/functional nano-catalysts and their application in electrocatalysis as well as in fuel cells/metal-air battery devices. As the first author or corresponding author (including co-authorship), published 12 SCI papers in journals such as Nature Communications, Journal of the American Chemical Society, JACS Au, Applied Catalysis B: Environmental, Energy Storage Materials, and National Science Review. Additionally, holds one authorized invention patent.